CN 41-1243/TG ISSN 1006-852X
CN
Advanced Search+
Volume 44 Issue 1
Feb.  2024
Turn off MathJax
Article Contents
Article Navigation >  Diamond & Abrasives Engineering  > 2024  >  44(1): 39-49
NIU Hao, JIN Zhuji, SHEN Yu, YANG Huipeng. Preparation of Ni-W alloy disc for dynamic friction polishing of diamond[J]. Diamond & Abrasives Engineering, 2024, 44(1): 39-49. doi: 10.13394/j.cnki.jgszz.2023.0042
Citation: NIU Hao, JIN Zhuji, SHEN Yu, YANG Huipeng. Preparation of Ni-W alloy disc for dynamic friction polishing of diamond[J]. Diamond & Abrasives Engineering, 2024, 44(1): 39-49. doi: 10.13394/j.cnki.jgszz.2023.0042
shu

Preparation of Ni-W alloy disc for dynamic friction polishing of diamond

doi: 10.13394/j.cnki.jgszz.2023.0042

  • Laboratory of Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian 116024, Liaoning, China

More Information
  • Received Date: 2023-02-27
  • Accepted Date: 2023-04-13
  • Rev Recd Date: 2023-04-04
    • Available Online: 2023-11-06
    Abstract
  • To investigate the impact of bath composition and process conditions on Ni-W alloy coating, Ni-W alloy discs with low internal stress and high hardness were prepared for dynamic friction polishing of diamonds. The effects of complexing agent concentration, solution pH, and saccharin sodium concentration on the internal stress, tungsten content, hardness, and deposition rate of the coating were investigated by single experiments. Additionally, the effects of different additives on the surface leveling of the coating were also investigated. Finally, salicylaldehyde was selected as the leveling agent, and the reverse pulse current was applied to reduce the surface roughness of the coating. A Ni-W alloy disc with a hardness of HV 713 and a coating thickness of about 0.66 mm was prepared. Diamond dynamic friction polishing was carried out using these alloy discs to explore appropriate polishing process parameters. The best polishing effects were achieved at a disc speed of 8000 r/min and a pressure of 40 N, yielding a removal rate of 5.56 μm/min, a grinding ratio of 0.394, and a surface roughness (Ra) of 3.7 nm. Comparing wear parameters revealed that Ni-W alloy discs can achieve better polishing effects using traditional cast iron discs in friction chemical polishing of diamonds.

     

    • FullText(HTML)
  • loading
    • References(26)
  • [1]
    SUZUKI K, IWAI M, UEMATSU T, et al. Material removal mechanism in dynamic friction polishing of diamond [J]. Key Engineering Materials,2003,460:238-239. doi: 10.4028/www.scientific.net/KEM.238-239.235
    [2]
    PAUL E, EVANS C J, MANGAMELLI A, et al. Chemical aspects of tool wear in single point diamond turning [J]. Precision Engineering,1996,18(1):4-19. doi: 10.1016/0141-6359(95)00019-4
    [3]
    JONHNSON O. Catalysis and the interstitial-electron model for metals [J]. Journal of Catalysis. 1973, 1(21): 1-54.
    [4]
    马兴伟. 高速摩擦抛光金刚石膜用FeAl基合金抛光盘的制备及性能研究 [D]. 大连: 大连理工大学, 2011.

    MA Xingwei. Study on the fabracation and properties of FeAl based alloy polishing plate for dynamic friction polishing of diamond film [D]. Dalian: Dalian University of Technology, 2011.
    [5]
    孔军. 高速摩擦抛光金刚石用抛光盘的研制[D]. 大连: 大连理工大学, 2013.

    KONG Jun. Develop of polishing plate used in dynamic friction polishing of diamond. [D]. Dalian: Dalian University of Technology, 2013.
    [6]
    林佳志. 摩擦化学抛光单晶金刚石的工艺研究[D]. 大连: 大连理工大学, 2015.

    LIN Jiazhi. Research on dynamic friction polishing technology for single crystal diamond [D]. Dalian: Dalian University of Technology, 2015.
    [7]
    史双佶. 金刚石摩擦化学抛光用抛光盘制备及抛光机理研究[D]. 大连: 大连理工大学, 2016.

    SHI Shuangji. Preparation and polishing mechanism research of polishing plate used for dynamic friction polishing diamond [D]. Dalian: Dalian University of Technology, 2016.
    [8]
    KAMPMANN A, SITTINGER V, RECHID J, et al. Large area electrodeposition of Cu(In, Ga)Se2 [J]. Thin Solid Films,2000,361-362:309-313. doi: 10.1016/S0040-6090(99)00863-9
    [9]
    HUANG C H, SHE W Y, WU H M. Study of stress reducers in nickel-tungsten electroforming baths [J]. Plating and Surface Finishing,1999,86(12):79-83.
    [10]
    MIZUSHIMA I, TANG P T, HANSEN H N, et al. Residual stress in Ni-W electrodeposits [J]. Electrochimica Acta,2006,51(27):6128-6134. doi: 10.1016/j.electacta.2005.11.053
    [11]
    LIU R, WANG H, LI X P, et al. Study of internal stress of amorphous Ni-W alloy films [J]. Materials Science and Technology,2009,25(8):960-968. doi: 10.1179/174328408X311071
    [12]
    BERKH O, BURSTEIN L, SHACHAM-DIAMAND Y, et al. The chemical and electrochemical activity of citrate on Pt electrodes [J]. Journal of the Electrochemical Society,2011,158(6):F85. doi: 10.1149/1.3560572
    [13]
    李延伟, 尚雄, 姚金环, 等. 糖精对柠檬酸盐中性电镀镍影响的研究 [J]. 电镀与精饰,2013,35(9):43-46. doi: 10.3969/j.issn.1001-3849.2013.09.011

    LI Yanwei, SHANG Xiong, YAO Jinhuan, et al. Investigations on influences of saccharin additive on nickel electroplating in neutral citrate electrolyte [J]. Plating & Finishing,2013,35(9):43-46. doi: 10.3969/j.issn.1001-3849.2013.09.011
    [14]
    成旦红, 郭鹤桐, 刘淑兰. 金属沉积层的应力起源及影响因素 [J]. 电镀与精饰,1992(6):15-19.

    CHENG Danhong, GUO Hetong, LIU Shulan. Stress origin and influence factors of metal deposits [J]. Plating & Finishing,1992(6):15-19.
    [15]
    MOCKUTE D, BERNOTIENE G. The interaction of additives with the cathode in a mixture of saccharin, 2-butyne-1, 4-diol and phthalimide during nickel electrodeposition in a Watts-type electrolyte [J]. Surface & Coatings Technology,2000,135(1):42-47. doi: 10.1016/S0257-8972(00)00862-8
    [16]
    冯立明, 电镀工艺学 [M]. 北京: 化学工业出版社, 2010.

    FENG Liming, et al. Electroplating technology [M]. Beijing: Chemical Industry Press, 2010.
    [17]
    安茂忠. 电镀理论与技术 [M]. 哈尔滨: 哈尔滨工业大学出版社, 2004.

    AN Maozhong. Electroplating theory and technology [M]. Harbin: Harbin Institute of Technology Press, 2004.
    [18]
    BRENNER A. Electrodeposition of tungsten alloys containing cobalt, nickel, and/or iron [M]// BRENNER A. Electrodeposition of Alloys. New York: Academic Press, 1963: 347-412.
    [19]
    李延伟, 黄晓曦, 杨哲龙, 等. 镀镍层内应力及其测量方法 [J]. 电镀与环保,2011,31(1):4-7. doi: 10.3969/j.issn.1000-4742.2011.01.002

    LI Yanei, HUANG Xiaoxi, YANG Zhelong, et al. Internal stress of nickel coating and its measuring methods [J]. Electroplating& Pollution Control,2011,31(1):4-7. doi: 10.3969/j.issn.1000-4742.2011.01.002
    [20]
    BRATOEVA M, ATANASOV N. Effect of sulfamate-citrate electrolyte pH on the Ni-W alloy electrodeposition [J]. Russian Journal of Electrochemistry,2000,36(1):60-63. doi: 10.1007/BF02757797
    [21]
    OBRADOVIĆ M D, STEVANOVIĆ R M, DESPIĆ A R. Electrochemical deposition of Ni–W alloys from ammonia–citrate electrolyte [J]. Journal of Electroanalytical Chemistry,2003,552:185-196. doi: 10.1016/S0022-0728(03)00151-7
    [22]
    LI Y, YAO J, HUANG X. Effect of saccharin on the process and properties of nickel electrodeposition from sulfate electrolyte [J]. International Journal of Metallurgical & Materials Engineering,2016,2:149450140. doi: 10.15344/2455-2372/2016/123
    [23]
    SHREERAM D D, LI S, BEDEKAR V, et al. Effect of reverse pulse time on electrodeposited Ni-W coatings [J]. Surface & Coatings Technology,2017,325:386-396. doi: 10.1016/j.surfcoat.2017.06.037
    [24]
    彭超, 殷志伟, 汪晓, 等. 十二烷基硫酸钠和1,4-丁炔二醇电沉积Ni-W合金的机理 [J]. 粉末冶金材料科学与工程,2011,16(2):167-174. doi: 10.3969/j.issn.1673-0224.2011.02.003

    PENG Chao, YIN Zhiwei, WANG Xiao, et al. Mechanism of sodium lauryl sulfate and 1,4-butynediol in electrodepositing Ni-W alloys [J]. Materials Science and Engineering of Powder MetaIlurgy,2011,16(2):167-174. doi: 10.3969/j.issn.1673-0224.2011.02.003
    [25]
    KUMAR U P, KENNADY C J. Influence of vanillin on the corrosion behavior of Ni-W alloy electrodeposits and its properties [J]. Journal of Electroanalytical Chemistry,2016,782:67-75. doi: 10.1016/j.jelechem.2016.10.009
    [26]
    KUMAR U P, KENNADY C J, ZHOU Q. Effect of salicylaldehyde on microstructure and corrosion resistance of electrodeposited nanocrystalline Ni-W alloy coatings [J]. Surface & Coatings Technology,2015,283:148-155. doi: 10.1016/j.surfcoat.2015.10.056
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(14)  / Tables(3)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (222) PDF downloads(26) Cited by()
    Proportional views
    Related
    Website Copyright © Zhengzhou Research Institute for Abrasives and Grinding Co., Ltd.  豫ICP备05008669号
    Address：No. 121, Wutong Street, Hitech Zone, Zhengzhou  Postal Code：450001
    Phone: 0371-67650914 67661785
    Email Alerts RSS

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return