CN 41-1243/TG ISSN 1006-852X
CN
Advanced Search+
Volume 44 Issue 1
Feb.  2024
Turn off MathJax
Article Contents
Article Navigation >  Diamond & Abrasives Engineering  > 2024  >  44(1): 85-91
CAI Zhongwei, SUN Yuli, CHEN Fayu, SHENG Yi, ZUO Dunwen. Study on the machining performance of electric antirust grinding[J]. Diamond & Abrasives Engineering, 2024, 44(1): 85-91. doi: 10.13394/j.cnki.jgszz.2023.0011
Citation: CAI Zhongwei, SUN Yuli, CHEN Fayu, SHENG Yi, ZUO Dunwen. Study on the machining performance of electric antirust grinding[J]. Diamond & Abrasives Engineering, 2024, 44(1): 85-91. doi: 10.13394/j.cnki.jgszz.2023.0011
shu

Study on the machining performance of electric antirust grinding

doi: 10.13394/j.cnki.jgszz.2023.0011
  • 1.

    College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

  • 2.

    Nanjing Xinghe Precision Intelligent Manufacturing Research Institute, Nanjing 211106, China

More Information
  • Received Date: 2023-01-27
  • Accepted Date: 2023-04-13
  • Rev Recd Date: 2023-02-21
    • Available Online: 2023-11-06
    Abstract
  • In view of the issues of environmental pollution, harm to human health, and increase in production and processing costs caused by the use of grinding fluid in traditional grinding, this paper proposes an electric antirust grinding method that utilizes tap water instead of traditional grinding fluid, The self-made electric antirust grinding system is employed to carry out research on processing performance. The differences in grinding force, grinding force ratio, grinding specific energy, grinding temperature and surface roughness between electric antirust grinding, dry grinding, and wet grinding are compared and analyzed. The results show that the average difference between electric antirust grinding and dry grinding is about 19.2%, and the average difference between electric antirust grinding and wet grinding is about 7.7%. Its processing performance surpasses dry grinding and is close to the level of wet grinding. Therefore, the electric antirust grinding method demonstrates a certain level of applicability.

     

    • FullText(HTML)
  • loading
    • References(12)
  • [1]
    WANG Z X, ZHANG T Q, YU T B, et al. Assessment and optimization of grinding process on AISI 1045 steel in terms of green manufacturing using orthogonal experimental design and grey relational analysis [J]. Journal of Cleaner Production,2020,253(C):119896.
    [2]
    孙永杰, 朱涛, 蔡明, 等. 镍基单晶高温合金磨削润滑方式对表面完整性的影响 [J]. 金刚石与磨料磨具工程,2022,42(2):201-207.

    SUN Yongjie, ZHU Tao, CAI Ming, et al. Influence of grinding lubrication methods on surface integrity of nickel-based single crystal superalloy [J]. Diamond & Abrasives Engineering,2022,42(2):201-207.
    [3]
    WU Xifeng, LI Changhe, ZHOU Zongming, et al. Circulating purification of cutting fluid: an overview [J]. The International Journal of Advanced Manufacturing Technology,2021,117(9/10):31-36.
    [4]
    MANU D, SHARMA V S, SINGH D J, et al. Environment-friendly technological advancements to enhance the sustainability in surface grinding- A review [J]. Journal of Cleaner Production,2018,197:218-231. doi: 10.1016/j.jclepro.2018.05.280
    [5]
    贾东洲, 李长河, 张彦彬, 等. 磨削加工冷却润滑现状及展望 [J]. 机械工程与自动化,2017(3):201-202,205.

    JIA Dongzhou, LI Changhe, ZHANG Yanbin, et al. Overview and prospect of cooling lubrication in grinding [J]. Mechanical Engineering & Automation,2017(3):201-202,205.
    [6]
    蔡中伟, 孙玉利, 徐朋冲, 等. 绿色磨削加工技术研究进展 [J]. 机械制造与自动化,2022,51(6):1-5.

    CAI Zhongwei, SUN Yuli, XU Pengchong, et al. Research progress of green grinding technology [J]. Machine Building & Automation,2022,51(6):1-5.
    [7]
    袁松梅, 韩文亮, 朱光远, 等. 绿色切削微量润滑增效技术研究进展 [J]. 机械工程学报,2019,55(5):175-185. doi: 10.3901/JME.2019.05.175

    YUAN Songmei, HAN Wenliang, ZHU Guangyuan, et al. Recent progress on the efficiency increasing methods of minimum quantity lubrication technology in green cutting [J]. Journal of Mechanical Engineering,2019,55(5):175-185. doi: 10.3901/JME.2019.05.175
    [8]
    TSUKAMOTO S, NISHIKAWA N, OKAMOTO K, et al. Development of the electricity rust preventive machining method in surface grinding [J]. Key Engineering Materials,2004(257/258):483-488. doi: 10.4028/www.scientific.net/KEM.257-258.483
    [9]
    西川尚宏, 佐藤佳則, 工藤圭太, 等. 電気防錆加工法の開発研究―各地の水による防錆への影響― [J]. 砥粒加工学会誌,2011,55(11):656-661.

    NISHIKAWA N, SATO Y, KUDO K, et al. Development of electric rust preventive machining method -Evaluation of influence on rust prevention with water of different regions- [J]. Journal of the Japan Society for Abrasive Technology,2011,55(11):656-661.
    [10]
    西川尚宏, 佐藤佳則, 加藤将, 等. 電気防錆機械加工法の開発 工作物および加工機筐体の防錆 [J]. 砥粒加工学会誌,2011,55(3):167-172.

    NISHIKAWA N, SATO Y, KATO T, et al. Development of electric rust preventive machining method Rust prevention of workpiece and machine body [J]. Journal of the Japan Society for Abrasive Technology,2011,55(3):167-172.
    [11]
    西川尚宏, 佐藤佳則, 加藤将, 等. 電気防錆機械加工法の開発—研削盤上での補助電極による最適防錆電流と電気特性の検証— [J]. 砥粒加工学会誌,2011,55(5):290-297.

    NISHIKAWA N, SATO Y, KATO T, et al. Development of electric rust preventive machining method -Verification of the optimized rust prevention current and electrical characteristic with supporting electrode in grinding- [J]. Journal of the Japan Society for Abrasive Technology,2011,55(5):290-297.
    [12]
    NISHIKAWA N, SATO Y, KUDO K, et al. Development of electric rust preventive machining method - correspond to difference of water in world: use of deionized refined water [J]. Advanced Materials Research,2012,497:365-372. doi: 10.4028/www.scientific.net/AMR.497.365
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(11)  / Tables(2)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (209) PDF downloads(23) Cited by()
    Proportional views
    Related
    Website Copyright © Zhengzhou Research Institute for Abrasives and Grinding Co., Ltd.  豫ICP备05008669号
    Address：No. 121, Wutong Street, Hitech Zone, Zhengzhou  Postal Code：450001
    Phone: 0371-67650914 67661785
    Email Alerts RSS

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return