CN 41-1243/TG ISSN 1006-852X
CN
Advanced Search+
Volume 44 Issue 1
Feb.  2024
Turn off MathJax
Article Contents
Abstract
References
Article Navigation >  Diamond & Abrasives Engineering  > 2024  >  44(1): 123-132
GAO Xianyi, ZHANG Dechen, MA Guoqing, LIU Xingdong, WANG Yubo. Analysis and optimization of traveling wave vibration of five kinds of diamond circular saw blades[J]. Diamond & Abrasives Engineering, 2024, 44(1): 123-132. doi: 10.13394/j.cnki.jgszz.2023.0008
Citation: GAO Xianyi, ZHANG Dechen, MA Guoqing, LIU Xingdong, WANG Yubo. Analysis and optimization of traveling wave vibration of five kinds of diamond circular saw blades[J]. Diamond & Abrasives Engineering, 2024, 44(1): 123-132. doi: 10.13394/j.cnki.jgszz.2023.0008
shu

Analysis and optimization of traveling wave vibration of five kinds of diamond circular saw blades

doi: 10.13394/j.cnki.jgszz.2023.0008

  • School of Mechanical Engineering and Automation, University of Science and Technology, Anshan 114051, Liaoning, China

More Information
  • Received Date: 2023-01-13
  • Rev Recd Date: 2023-05-18
    • Available Online: 2023-11-06
    Abstract
  • In order to reduce the sawing noise generated by diamond circular saw blades during stone processing, five typical diamond circular saw blades were selected for modal analysis and traveling wave vibration analysis by using Workbench software. The study explored the impact of various saw blade designs, including conventional saw blades, perforated saw blades, slit saw blades, and saw blades with nose-shaped radial grooves, holes, and interlayers, on traveling wave vibrations. The results show that the traveling wave resonance occurs in the conventional saw blades with diameters of 180 mm and 230 mm, causing strong noise. Conventional saw blades with diameters of 115 mm, 350 mm and 105 mm do not show traveling wave resonance. The δ value for the 180 mm and 230 mm saw blades is too large, which effectively presents traveling wave resonance. The δ value for the 115 mm and 350 mm saw blade is too small, which does not reduce noise very well. The δ value for the 105 mm sandwich saw blade is too large and has a significant effect on noise reduction. To avoid traveling wave resonance and enhance noise reduction, five design schemes incorporating radial grooves, raindrop holes, and damping interlayers are proposed for various blade diameters. The resulting δ values are 8.13 %, 7.21 %, 6.01 %, 6.39 %, and 7.00 %, respectively.

     

    • FullText(HTML)
    • References(18)
  • [1]
    李丽萍, 卓丽云, 王君超. 工艺参数对圆锯片动态稳定性影响研究 [J]. 制造技术与机床,2022(10):157-163.

    LI Liping, ZHUO Liyun, WANG Junchao. Study on the influence of process parameters to the dynamic stability of circular saw blade [J]. Manufacturing Technology & Machine Tool,2022(10):157-163.
    [2]
    田永军, 孙爽, 张翔宇, 等. 金刚石圆锯片振动与噪声机理及其减振降噪技术研究综述 [J]. 机械设计,2020,37(3):1-13.

    TIAN Yongjun, SUN Shuang, ZHANG Xiangyu, et al. Review of the research on the vibration and noise mechanism of diamond circular saw blades and the vibration-and-noise reduction technology [J]. Journal of Machine Design,2020,37(3):1-13.
    [3]
    于家伟, 张进生, 王志, 等. 基于FEM/BEM的开降噪孔金刚石圆锯片孔形研究 [J]. 金刚石与磨料磨具工程,2016,36(4):63-67, 74. doi: 10.13394/j.cnki.jgszz.2016.4.0013

    YU Jiawei, ZHANG Jinsheng, WANG Zhi, et al. Study on hole shape of diamond circular saw blade based on FEM/BEM [J]. Diamond & Abrasive Engineering,2016,36(4):63-67, 74. doi: 10.13394/j.cnki.jgszz.2016.4.0013
    [4]
    赵民, 李旭. 金刚石锯片切割石材摩擦与噪声实验研究 [J]. 机械设计与制造,2017(10):16-18.

    ZHAO Min, LI Xu. Study on the experiment of friction and noise with diamond saw blade cutting stone [J]. Mechanical Design & Manufacture,2017(10):16-18.
    [5]
    陈立新. 胶接圆锯片基体声辐射特性研究及胶接工艺设计 [D]. 济南: 山东大学, 2021.

    CHEN Lixin. Research on acoustic radiation characteristics of glued circular saw blade matrix and design of gluing process [D]. Jinan: Shandong University, 2021.
    [6]
    邹新光, 刘一波, 刘锟, 等. 无夹层复合基体金刚石锯片噪声研究 [J]. 超硬材料工程,2019,31(3):32-35. doi: 10.3969/j.issn.1673-1433.2019.03.009

    ZOU Xinguang, LIU Yibo, LIU Kun, et al. Study on noise of diamond saw blade without sandwich composite matrix [J]. Superhard Material Engineering,2019,31(3):32-35. doi: 10.3969/j.issn.1673-1433.2019.03.009
    [7]
    贾娜, 陈肖男, 岳德国, 等. 超薄硬质合金圆锯片槽孔结构的减振优化设计 [J]. 工具技术,2022,56(8):62-66. doi: 10.3969/j.issn.1000-7008.2022.08.012

    JIA Na, CHEN Xiaonan, YUE Deguo, et al. Vibration damping optimization design of ultra-thin carbide slotted hole structure circular saw blade [J]. Tool Engineering,2022,56(8):62-66. doi: 10.3969/j.issn.1000-7008.2022.08.012
    [8]
    陈博. 新型耐磨/消音金刚石圆锯片的研制 [D]. 杭州: 浙江工业大学, 2006.

    CHEN Bo. Development of new wear-resistant/silencing diamond circular saw blade [D]. Hangzhou: Zhejiang University of Technology, 2006.
    [9]
    冯唯. 金刚石圆锯片水槽优化设计及振动声辐射特性研究 [D]. 济南: 山东大学, 2021.

    FENG Wei. Optimization design of diamond circular saw blade with flume and study on vibration acoustic radiation characteristics [D]. Jinan: Shandong University, 2021.
    [10]
    赵雷, 张德臣, 闫春宝, 等. 金刚石圆锯片行波共振分析及优化 [J]. 金刚石与磨料磨具工程, 2022, 42(2): 240-247.

    ZHAO Lei, ZHANG Dechen, YAN Chunbao, et al. Traveling wave resonance analysis and optimization of diamond circular saw blade [J]. Diamond & Abrasive Engineering. 2022, 42(2): 240-247.
    [11]
    刘锟, 刘一波, 邹新光, 等. 金刚石烧结锯片降噪消音研究 [J]. 超硬材料工程,2022,34(3):24-30.

    LIU Kun, LIU Yibo, ZOU Xinguang, et al. Study on noise reduction and sound suppression of diamond sintered saw blade [J]. Superhard Material Engineering,2022,34(3):24-30.
    [12]
    冯祖宾, 冯海洲, 李庆谊, 等. 消音金刚石锯片的研制 [J]. 金刚石与磨料磨具工程,1999(4):2-4. doi: 10.13394/j.cnki.jgszz.1999.04.001

    FENG Zubin, FENG Haizhou, LI Qingyi, et al. Development of silencing diamond saw blade [J]. Diamond & Abrasive Engineering,1999(4):2-4. doi: 10.13394/j.cnki.jgszz.1999.04.001
    [13]
    孙传涛, 张德臣, 代爽. 圆孔锯锯片的模态分析 [J]. 辽宁科技大学学报,2015,38(5):358-362.

    SUN Chuantao, ZHANG Dechen, DAI Shuang. Modal analysis of circular saw blade [J]. Journal of Liaoning University of Science and Technology,2015,38(5):358-362.
    [14]
    张德臣, 孙艳平, 韩二中. 圆锯片振动和稳定的分析理论与方法 [M]. 北京: 冶金工业出版社, 2018.

    ZHANG Dechen, SUN Yanping, HAN Erzhong. Analytical theory and method for vibration and stability of circular saw blades [M]. Beijing: Metallurgical Industry Press, 2018.
    [15]
    彭靓, 高子清. 国内外工业噪声标准体系研究及启示 [J]. 噪声与振动控制,2019,39(4):167-172. doi: 10.3969/j.issn.1006-1355.2019.04.031

    PENG Liang, GAO Ziqing. Research and enlightenment of industrial noise standard system at home and abroad [J]. Noise and vibration control,2019,39(4):167-172. doi: 10.3969/j.issn.1006-1355.2019.04.031
    [16]
    杨秀鲁, 刘鲁宁, 王永安, 等. 基于ANSYS Workbench软件的圆锯片基体减振降噪设计 [J]. 济南大学学报(自然科学版),2020,34(2):163-168.

    YANG Xiulu, LIU Luning, WANG Yong'an, et al. Vibration and noise reduction design of circular saw blade matrix based on ANSYS Workbench software [J]. Journal of Jinan University (Natural Science Edition),2020,34(2):163-168.
    [17]
    樊勇. 开槽夹层圆锯片的振动研究及优化设计 [D]. 鞍山: 辽宁科技大学, 2014.

    FAN Yong. Vibration research and optimization design of slotted sandwich circular saw blade [D]. Anshan: Liaoning University of Science and Technology, 2014.
    [18]
    姚涛, 段国林, 蔡瑾, 等. 开槽填充黏弹性材料对圆锯片振动的影响分析 [J]. 工程设计学报,2010,17(5):355-359. doi: 10.3785/j.issn.1006-754X.2010.05.008

    YAO Tao, DUAN Guolin, CAI Jin, et al. Analysis of influence of slotted viscoelastic material on vibration of circular saw blade [J]. Journal of Engineering Design,2010,17(5):355-359. doi: 10.3785/j.issn.1006-754X.2010.05.008
    • Relative Articles

  • Relative Articles

    [1]FENG Lidong, LI Wenhui, LI Xiuhong, ZHANG Yan, WEN Xuejie, FAN Yu. Analysis of the influence of container structure on the flow characteristics of vertical vibration polishing granular media[J]. Diamond & Abrasives Engineering, 2024, 44(1): 1-8. doi: 10.13394/j.cnki.jgszz.2023.0067
    [2]SUN Yuhu, ZHANG Jinsheng, ZHANG Heng, WANG Kaida, GUO Anshun, NIU Pingping. Effect of corrosion on sawing stability of diamond circular saw blade[J]. Diamond & Abrasives Engineering, 2024, 44(2): 259-266. doi: 10.13394/j.cnki.jgszz.2023.0115
    [3]LIU Xingdong, ZHANG Dechen, WANG Yubo, GAO Xianyi, MA Guoqing. Analysis and optimization of traveling wave vibration of large diamond thin-wall drill bits[J]. Diamond & Abrasives Engineering, 2024, 44(4): 485-494. doi: 10.13394/j.cnki.jgszz.2023.0137
    [4]JIA Jian, LI Xiuhong, LI Wenhui, YANG Shengqiang, WANG Jiaming. Analysis of influence of installation angle on vibration finishing effect of cross hole specimen[J]. Diamond & Abrasives Engineering, 2023, 43(1): 102-109. doi: 10.13394/j.cnki.jgszz.2021.5003
    [5]DONG Xianglong, ZHENG Lei, WEI Wendong, SUN Xiaohan, LIU Ziwen, SUN Yantao, HE Zhiwei. Analysis of drilling force characteristics and trepanning tool wear during GFRP low frequency axial vibration drilling hole[J]. Diamond & Abrasives Engineering, 2023, 43(1): 82-89. doi: 10.13394/j.cnki.jgszz.2022.0053
    [6]ZHAO Lei, ZHANG Dechen, YAN Chunbao, LEI Zhongxing, CHENG Libin. Analysis and optimization of traveling wave resonance of diamond circular saw blade[J]. Diamond & Abrasives Engineering, 2022, 42(2): 240-247. doi: 10.13394/j.cnki.jgszz.2021.0112
    [7]WANG Qiuyan, LIANG Zhiqiang, BAI Shuowei, WU Yongbo, JIA Shun. Power spectrum density characterization of grinding wheel surface in ultrasonic vibration spiral grinding[J]. Diamond & Abrasives Engineering, 2021, 41(1): 58-64. doi: 10.13394/j.cnki.jgszz.2021.1.0010
    [8]GUO Shuaihong, LI Jun, WANG Huantao. Design parameters and modal optimization of radial vibration matching layer transducer[J]. Diamond & Abrasives Engineering, 2021, 41(6): 68-73. doi: 10.13394/j.cnki.jgszz.2021.6.0012
    [9]QIU Luyi, WANG Qiuyan, BAI Shuowei, JU Junwei, LIN Runze. Optimization of grinding process parameters of diamond thin circular saw blade substrate[J]. Diamond & Abrasives Engineering, 2021, 41(5): 84-88. doi: 10.13394/j.cnki.jgszz.2021.5.0014
    [10]HU Huan, ZHANG Yuncai, LI Chunlin, ZHAO Lei. Finite element simulation of sawing force for impact-resistant diamond saw blade——Take the circular saw blades inlaid with copper nails in the bottom holes of keyhole sink as an example[J]. Diamond & Abrasives Engineering, 2020, 40(1): 103-107. doi: 10.13394/j.cnki.jgszz.2020.1.0016
    [11]HU Huan, ZHANG Yuncai, LI Chunlin, ZHAO Lei. Finite element simulation of sawing force for impact-resistant diamond saw blades——Take circular saw blades with new semi-circular sink tooth shape as an example[J]. Diamond & Abrasives Engineering, 2020, 40(2): 89-93. doi: 10.13394/j.cnki.jgszz.2020.2.0015
    [12]SHI Guangfeng, FU Wang, WANG Shukun, HAN Dongdong, ZHANG Hua, LIU Siyu. Sawed surface analysis of natural diamond[J]. Diamond & Abrasives Engineering, 2019, 39(2): 13-16. doi: 10.13394/j.cnki.jgszz.2019.2.0003
    [13]WANG Zhongxiao, LI Shichao, QI Yanjie, GUO Wenhui, YANG Gaofeng, ZHANG Yuhong. Power prediction model of circular saw blade sawing granite based on multivariate nonlinear regression analysis[J]. Diamond & Abrasives Engineering, 2019, 39(2): 72-75. doi: 10.13394/j.cnki.jgszz.2019.2.0014
    [14]ZHAO Jiaqi, HUANG Bo, ZHANG Jinsheng, JU Junwei, HAN Yaqun. Study on SPL of multi-blade block cutter based on statistical energy method[J]. Diamond & Abrasives Engineering, 2019, 39(6): 92-98. doi: 10.13394/j.cnki.jgszz.2019.6.0016
    [15]ZHANG Bainian, ZHANG Jinsheng, JU Junwei, CHEN Xiaotao. Stress analysis and process parameters optimization of circular saw blade during quenching process[J]. Diamond & Abrasives Engineering, 2018, 38(3): 36-41. doi: 10.13394/j.cnki.jgszz.2018.3.0008
    [16]YANG Dong, CHEN Zhiqiang, WANG Xiaodong, WU Xiwang. Effects on the performance of small diameter diamond saws by pressureless sintering process[J]. Diamond & Abrasives Engineering, 2017, 37(5): 58-61. doi: 10.13394/j.cnki.jgszz.2017.5.0011
    [17]LI Yang, WANG Yanjun, QIN Ke. Mechanical analysis on diamond saw blade based on ANSYS Workbench[J]. Diamond & Abrasives Engineering, 2017, 37(2): 41-45. doi: 10.13394/j.cnki.jgszz.2017.2.0009
    [18]YU Jiawei, ZHANG Jinsheng, WANG Zhi, YE Luhao, GE Jianyu, GAO Lijun. Study on shape of noise-reduction holes on diamond circular saw blade based on FEM/BEM[J]. Diamond & Abrasives Engineering, 2016, 36(4): 63-67,74. doi: 10.13394/j.cnki.jgszz.2016.4.0013
    [19]ZHANG Yunfeng, CUI Mingming. Reliability and sensitivity of diamond circular saw blade[J]. Diamond & Abrasives Engineering, 2016, 36(3): 72-75. doi: 10.13394/j.cnki.jgszz.2016.3.0015
    [20]ZHAO Min, LI Xu. Transverse vibration analysis of diamond saw blade at different speeds[J]. Diamond & Abrasives Engineering, 2016, 36(5): 60-63. doi: 10.13394/j.cnki.jgszz.2016.5.0012
    • Supplements(0)
    • Cited By
  • Created with Highcharts 5.0.7Amount of accessChart context menuAbstract Views, HTML Views, PDF Downloads StatisticsAbstract ViewsHTML ViewsPDF Downloads2024-052024-062024-072024-082024-092024-102024-112024-122025-012025-022025-032025-04020406080
    Created with Highcharts 5.0.7Chart context menuAccess Class DistributionFULLTEXT: 34.1 %FULLTEXT: 34.1 %META: 60.2 %META: 60.2 %PDF: 5.8 %PDF: 5.8 %FULLTEXTMETAPDF
    Created with Highcharts 5.0.7Chart context menuAccess Area Distribution其他: 17.3 %其他: 17.3 %其他: 0.6 %其他: 0.6 %Jaipur: 0.2 %Jaipur: 0.2 %Kao-sung: 0.2 %Kao-sung: 0.2 %Taoyuan District: 0.1 %Taoyuan District: 0.1 %Thane: 0.1 %Thane: 0.1 %[]: 0.1 %[]: 0.1 %上海: 3.9 %上海: 3.9 %九江: 0.6 %九江: 0.6 %凤凰城: 0.1 %凤凰城: 0.1 %北京: 0.5 %北京: 0.5 %南通: 0.3 %南通: 0.3 %厦门: 0.3 %厦门: 0.3 %台州: 0.4 %台州: 0.4 %合肥: 0.2 %合肥: 0.2 %哥伦布: 0.1 %哥伦布: 0.1 %唐山: 0.3 %唐山: 0.3 %嘉兴: 0.1 %嘉兴: 0.1 %大连: 0.1 %大连: 0.1 %天津: 0.5 %天津: 0.5 %太原: 0.2 %太原: 0.2 %宝鸡: 0.1 %宝鸡: 0.1 %巴甫洛达尔: 0.8 %巴甫洛达尔: 0.8 %常州: 0.1 %常州: 0.1 %广州: 0.5 %广州: 0.5 %弗吉: 0.1 %弗吉: 0.1 %张家口: 5.0 %张家口: 5.0 %德阳: 0.2 %德阳: 0.2 %恩施: 0.2 %恩施: 0.2 %成都: 0.5 %成都: 0.5 %扬州: 0.2 %扬州: 0.2 %新乡: 0.3 %新乡: 0.3 %昆明: 0.9 %昆明: 0.9 %杭州: 0.3 %杭州: 0.3 %格兰特县: 0.1 %格兰特县: 0.1 %桂林: 0.1 %桂林: 0.1 %武汉: 0.3 %武汉: 0.3 %泉州: 0.4 %泉州: 0.4 %泰州: 0.1 %泰州: 0.1 %洛阳: 0.2 %洛阳: 0.2 %济南: 0.4 %济南: 0.4 %深圳: 0.2 %深圳: 0.2 %温州: 0.1 %温州: 0.1 %湖州: 0.2 %湖州: 0.2 %湘潭: 0.1 %湘潭: 0.1 %湘西: 8.1 %湘西: 8.1 %漯河: 0.2 %漯河: 0.2 %焦作: 0.1 %焦作: 0.1 %盐城: 0.2 %盐城: 0.2 %石家庄: 0.5 %石家庄: 0.5 %纳什维尔: 0.3 %纳什维尔: 0.3 %芒廷维尤: 6.6 %芒廷维尤: 6.6 %芝加哥: 1.5 %芝加哥: 1.5 %莫斯科: 0.2 %莫斯科: 0.2 %蚌埠: 0.2 %蚌埠: 0.2 %衡水: 0.3 %衡水: 0.3 %衢州: 0.3 %衢州: 0.3 %西宁: 28.6 %西宁: 28.6 %西安: 0.1 %西安: 0.1 %西雅图: 0.1 %西雅图: 0.1 %许昌: 0.3 %许昌: 0.3 %诺沃克: 6.9 %诺沃克: 6.9 %贵阳: 0.2 %贵阳: 0.2 %运城: 0.6 %运城: 0.6 %郑州: 1.4 %郑州: 1.4 %重庆: 0.1 %重庆: 0.1 %铁岭: 0.1 %铁岭: 0.1 %镇江: 0.1 %镇江: 0.1 %长沙: 3.0 %长沙: 3.0 %阿什本: 0.1 %阿什本: 0.1 %青岛: 0.8 %青岛: 0.8 %鞍山: 0.6 %鞍山: 0.6 %马鞍山: 0.1 %马鞍山: 0.1 %其他其他JaipurKao-sungTaoyuan DistrictThane[]上海九江凤凰城北京南通厦门台州合肥哥伦布唐山嘉兴大连天津太原宝鸡巴甫洛达尔常州广州弗吉张家口德阳恩施成都扬州新乡昆明杭州格兰特县桂林武汉泉州泰州洛阳济南深圳温州湖州湘潭湘西漯河焦作盐城石家庄纳什维尔芒廷维尤芝加哥莫斯科蚌埠衡水衢州西宁西安西雅图许昌诺沃克贵阳运城郑州重庆铁岭镇江长沙阿什本青岛鞍山马鞍山

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(9)  / Tables(9)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (573) PDF downloads(55) Cited by()
    Proportional views
    Related
    Website Copyright © Zhengzhou Research Institute for Abrasives and Grinding Co., Ltd.  豫ICP备05008669号
    Address：No. 121, Wutong Street, Hitech Zone, Zhengzhou  Postal Code：450001
    Phone:  0371-55983716
    Email Alerts RSS

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return