CN 41-1243/TG ISSN 1006-852X
CN
Advanced Search+
Volume 43 Issue 3
Jun.  2023
Turn off MathJax
Article Contents
Article Navigation >  Diamond & Abrasives Engineering  > 2023  >  43(3): 379-385
DONG Yanhui, NIU Fengli, REN Ze, SHENG Xin, ZHU Yongwei. Comparison of lapping performance between diamond magnetic abrasives and silicon carbide magnetic abrasives[J]. Diamond & Abrasives Engineering, 2023, 43(3): 379-385. doi: 10.13394/j.cnki.jgszz.2022.0154
Citation: DONG Yanhui, NIU Fengli, REN Ze, SHENG Xin, ZHU Yongwei. Comparison of lapping performance between diamond magnetic abrasives and silicon carbide magnetic abrasives[J]. Diamond & Abrasives Engineering, 2023, 43(3): 379-385. doi: 10.13394/j.cnki.jgszz.2022.0154
shu

Comparison of lapping performance between diamond magnetic abrasives and silicon carbide magnetic abrasives

doi: 10.13394/j.cnki.jgszz.2022.0154

  • Nanjing University of Aeronautics and Astronautics, College of Mechanical & Electrical Engineering, Nanjing 210016, China

More Information
  • Received Date: 2022-09-16
  • Accepted Date: 2022-12-06
  • Rev Recd Date: 2022-11-29
    Abstract
  • The hardness of hard-brittle materials is high, which results in the low lapping efficiency of traditional silicon carbide magnetic abrasive and short abrasive life. In view of this situation, a magnetic abrasive with diamond particle as lapping grit was developed. Using high purity iron powder as iron-based phase and diamond particle as abrasive, diamond magnetic abrasives were prepared by resin bonding method. K9 glass was chosen as the part being machined. The service life and processing efficiency of magnetic lapping K9 glass were compared between with diamond magnetic abrasives and with silicon carbide magnetic abrasives. The lifespan of diamond magnetic abrasive is 60.00 min, and the number of work-piece which can be machined is 4.6 pieces in the service life. The average surface roughness of K9 glass reaches 0.036 μm. However, the service life of the silicon carbide magnetic abrasive particles is only 40 min, and the average surface roughness of the K9 glass workpiece can only be processed to 0.222 μm. Besides, the number of workpieces that can be processed during the service life is 3.6 pieces. Diamond magnetic abrasives can effectively improve the service life, the processing capacity of magnetic abrasives, and the processing efficiency of magnetic grinding.

     

    • FullText(HTML)
  • loading
    • References(22)
  • [1]
    ZHAO Z J, YIN T F, ZHU Z W, et al. Material removal energy in ultraprecision machining of micro-lens arrays on single crystal silicon by slow tool servo [J]. Journal of Cleaner Production,2022,335:130295. doi: 10.1016/j.jclepro.2021.130295
    [2]
    田可, 郭会茹, 吴勇波, 等. 旋转磁场下非球面工件的磁性混合流体抛光 [J]. 金刚石与磨料磨具工程,2022,42(4):495-503.

    TIAN Ke, GUO Huiru, WU Yongbo, et al. Magnetic mixed fluid polishing of aspheric workpieces under rotating magnetic fields [J]. Diamond & Abrasives Engineering,2022,42(4):495-503.
    [3]
    王振忠, 施晨淳, 张鹏飞, 等. 先进光学制造技术最新进展 [J]. 机械工程学报,2021,57(8):23-56. doi: 10.3901/JME.2021.08.023

    WANG Zhenzhong, SHI Chenchun, ZHANG Pengfei, et al. Recent progress of advanced optical manufacturing technology [J]. Journal of Mechanical Engineering,2021,57(8):23-56. doi: 10.3901/JME.2021.08.023
    [4]
    XIA Z, FANG F, AHEARNE E, et al. Advances in polishing of optical freeform surfaces: A review [J]. Journal of Materials Processing Technology,2020,286:116828. doi: 10.1016/j.jmatprotec.2020.116828
    [5]
    伍凡, 戴一帆. 先进光学制造专题导读 [J]. 光电工程,2020,47(8):2-3.

    WU Fan, DAI Yifan. Introduction to advanced optical manufacturing [J]. Opto-Electronic Engineering,2020,47(8):2-3.
    [6]
    杨震宇, 吕玉山, 邸寒旭, 等. 弹性黏结磁性磨料设计制造及抛光性能的研究 [J]. 组合机床与自动化加工技术,2020(10):44-46,50.

    YANG Zhenyu, LYU Yushan, DI Hanxu, et al. Research on design, fabrication and polishing properties of elastic bonded magnetic abrasives [J]. Modular Machine Tool& Automatic Manufacturing Technique,2020(10):44-46,50.
    [7]
    姜林志, 张桂香, 秦璞, 等. 磁性磨料和磨粒相粒径对磁力研磨效率的影响 [J]. 电镀与涂饰,2019,38(4):157-160.

    JIANG LinZhi, ZHANG GuiXiang, QIN Pu, et al. Effects of particle size and core size of magnetic abrasive on efficiency of magnetic abrasive finishing [J]. Electroplating & Finishing,2019,38(4):157-160.
    [8]
    刘文浩, 陈燕, 李文龙, 等. 磁粒研磨加工技术的研究进展 [J]. 表面技术,2021,50(1):47-61.

    LIU WenHao, CHEN Yan, LI WenLong, et al. Research progress of magnetic abrasive finishing technology [J]. Surface Technology,2021,50(1):47-61.
    [9]
    LI W S, LI J J, BO C, et al. Achieving in-situ alloy-hardening core-shell structured carbonyl iron powders for magnetic abrasive finishing [J]. Materials & Design,2021,212:110198.
    [10]
    吕旖旎, 陈燕, 赵杨, 等. 基于研磨氧化锆陶瓷的金刚石/铁磁性磨粒制备研究 [J]. 表面技术,2020,49(9):364-369.

    LYU Yini, CHEN Yan, ZHAO Yang, et al. Preparation of diamond/iron magnetic abrasive particles based on grinding zirconia ceramics [J]. Surface Technology,2020,49(9):364-369.
    [11]
    丘永亮, 邱腾雄, 阎秋生. K9玻璃磁性研磨抛光表面粗糙度试验研究 [J]. 金刚石与磨料磨具工程,2015,35(3):57-60.

    QIU Yongliang, QIU Tengxiu, YAN Qiusheng. Research on surface roughness of K9 glass by magnetic abrasive finishing [J]. Diamond & Abrasives Engineering,2015,35(3):57-60.
    [12]
    耿其东, 李春燕. 磁力研磨加工K9光学玻璃的实验研究 [J]. 表面技术,2018,47(7):112-118.

    GENG Qidong, LI Chunyan. Experimental study on magnetic abrasive finishing K9 optical glass [J]. Surface Technology,2018,47(7):112-118.
    [13]
    WANG L Y, SUN Y L, CHEN F Y, et al. Experimental study on vibration-assisted magnetic abrasive finishing for internal blind cavity by bias external rotating magnetic pole. Precision Engineering[J]. 2022, 74: 69-79.
    [14]
    李建军, 李文生, 成波, 等. 细长锆管表面磁力研磨高精光整参数优化研究 [J]. 稀有金属,2020,46(3):331-339.

    Li Jianjun, Li Wensheng, Cheng Bo, et al. Optimization parameters of high precision magnetic abrasive finishing to slender zirconium tube [J]. Chinese journal of Rare Metals,2020,46(3):331-339.
    [15]
    康璐. 粘结法制备磁性磨粒的工艺及其性能研究[D]. 鞍山: 辽宁科技大学, 2019.

    KANG Lu. Study on process and properties of preparation of magnetic abrasive by bonding method[D]. Anshan: University of Science and Technology Liaoning, 2019.
    [16]
    丁叶, 陈燕, 丁文龙, 等. 黏结法制备铁基碳化硼磁性磨粒 [J]. 表面技术,2022,51(3):151-157.

    DING Ye, CHEN Yan, DING Wenlong, et al. Preparation of iron based boron carbide magnetic abrasive by bonding method [J]. Surface Technology,2022,51(3):151-157.
    [17]
    LI K, MA R J, ZHANG M C, et al. Hybrid post-processing effects of magnetic abrasive finishing and heat treatment on surface integrity and mechanical properties of additively manufactured Inconel 718 superalloys [J]. Journal of Materials Science & Technology,2022,128:10-21.
    [18]
    JUN X H, HUA Z Y. Application of magnetic abrasive finishing process using alternating magnetic field for finishing polychlorotrifluoroethylene resin[J]. Materials Science Forum, 2022, 1066: 85-90.
    [19]
    SOUZA A M, SILVA E J D, YAMAGUCHI H, et al. Magnetic field-assisted finishing processes: From bibliometric analysis to future trends[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2022, 44(8): 327.
    [20]
    赵文渊, 李文辉, 白小云, 等. 采用粘结法的磁性磨粒制备工艺及实验研究 [J]. 中国机械工程,2019,30(5):535-541. doi: 10.3969/j.issn.1004-132X.2019.05.005

    ZHAO Wenyuan, LI Wenhui, BAI Xiaoyun, et al. Preparation technology and experimental study of magnetic abrasive particles by bonding method [J]. China Mechanical Engineering,2019,30(5):535-541. doi: 10.3969/j.issn.1004-132X.2019.05.005
    [21]
    黄水泉, 高尚, 黄传真, 等. 脆性材料磨粒加工的纳米尺度去除机理 [J]. 金刚石与磨料磨具工程,2022,42(3):257-266.

    HUANG Shuiquan, GAO Shang, HUANG Chuanzhen, et al. Nanoscale removal mechanism of abrasive processing of brittle materials [J]. Diamond & Abrasives Engineering,2022,42(3):257-266.
    [22]
    陈修忠. 磁性磨粒的性能指标体系分析与研究[D]. 太原: 太原理工大学, 2015.

    CHEN Xiuzhong. Performance indicator system analysis and research of magnetic abrasive[D]. Taiyuan: Taiyuan University of Technology, 2015.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(8)  / Tables(2)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (379) PDF downloads(58) Cited by()
    Proportional views
    Related
    Website Copyright © Zhengzhou Research Institute for Abrasives and Grinding Co., Ltd.  豫ICP备05008669号
    Address：No. 121, Wutong Street, Hitech Zone, Zhengzhou  Postal Code：450001
    Phone: 0371-67650914 67661785
    Email Alerts RSS

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return