CN 41-1243/TG ISSN 1006-852X
Volume 42 Issue 6
Jan.  2023
Turn off MathJax
Article Contents
BIAN Da, SONG Enmin, NI Zifeng, QIAN Shanhua, ZHAO Yongwu. Optimization of CMP processing parameters for Si based on response surface method[J]. Diamond & Abrasives Engineering, 2022, 42(6): 745-752. doi: 10.13394/j.cnki.jgszz.2022.0081
Citation: BIAN Da, SONG Enmin, NI Zifeng, QIAN Shanhua, ZHAO Yongwu. Optimization of CMP processing parameters for Si based on response surface method[J]. Diamond & Abrasives Engineering, 2022, 42(6): 745-752. doi: 10.13394/j.cnki.jgszz.2022.0081

Optimization of CMP processing parameters for Si based on response surface method

doi: 10.13394/j.cnki.jgszz.2022.0081
More Information
  • Received Date: 2022-06-01
  • Accepted Date: 2022-08-01
  • Rev Recd Date: 2022-07-06
  • To improve the polishing efficiency and precision, the optimum processing parameters of Si in the chemical mechanical polishing (CMP) process were analysed by CMP experiments and response surface methodology. The results show that polishing pressure has the largest influence on the material removal rate and surface roughness of Si polishing. The second largest influential factor is polishing rotational speed and the third is polishing fluid flow rate. The prediction models of material removal rate and surface roughness are established. The optimum processing parameters are obtained when the polishing pressure is 48.3 kPa, polishing rotational speed is 70 r/min and polishing fluid flow rate is 65 mL/min with the prediction models and by experiments. With these processing parameters, the material removal rate and surface roughness are 1 058.2 nm/min and 0.771 nm, respectively.

     

  • loading
  • [1]
    宋恩敏, 卞达, 徐浩, 等. 碳酸胍和聚乙二醇对单晶硅片CMP的影响 [J]. 固体电子学研究与进展,2022,42(1):63-67, 79.

    SONG Enmin, BIAN Da, XU Hao, et al. Effect of guanidine carbonate and polyethylene glycol on CMP of single crystal silicon wafer [J]. Research & Progress of SSE,2022,42(1):63-67, 79.
    [2]
    HSIEN Y H, HSU H K, TSAI T C, et al. Process development of high-k metal gate aluminum CMP at 28 nm technology node [J]. Microelectronic Engineering,2012,92:19-23. doi: 10.1016/j.mee.2011.04.013
    [3]
    宫学源. 中国半导体产业发展趋势及上游新材料投资机会 [J]. 新材料产业,2020,4:22-29.

    GONG Xueyuan. China semiconductor industry development trend and upstream new materials investment opportunities [J]. New Materials Industry,2020,4:22-29.
    [4]
    赵琦. 单晶硅元件CMP加工表面划痕去除和清洗工艺研究 [D]. 哈尔滨: 哈尔滨工业大学, 2021.

    ZHAO Qi. Study on scratch removal and cleaning process of CMP machining surface of monocrystalline silicon element [D]. Harbin: Harbin Institute of Technology, 2021.
    [5]
    徐嘉慧, 康仁科, 董志刚, 等. 硅片化学机械抛光技术的研究进展 [J]. 金刚石与磨料磨具工程,2020,40(4):24-33. doi: 10.13394/j.cnki.jgszz.2020.4.0004

    XU Jiahui, KANG Renke, DONG Zhigang, et al. Review on chemical mechanical polishing of silicon wafers [J]. Diamond & Abrasives Engineering,2020,40(4):24-33. doi: 10.13394/j.cnki.jgszz.2020.4.0004
    [6]
    SEUNGHEE O, JONGWON S. An integrated material removal model for silicon dioxide layers in chemical mechanical polishing processes [J]. Wear,2009,266:839-849. doi: 10.1016/j.wear.2008.12.014
    [7]
    PARK S W, KIM C B, KIM S Y, et al. Design of experimental optimization for ULSI CMP process applications [J]. Microelectronic Engineering,2003,66:488-495. doi: 10.1016/S0167-9317(02)00932-2
    [8]
    詹阳, 周国安. 化学机械抛光过程优化研究 [J]. 电子工业专用设备,2009,38(4):37-39. doi: 10.3969/j.issn.1004-4507.2009.04.007

    ZHAN Yang, ZHOU Guoan. Optimization of chemical mechanical polishing process [J]. Special Equipment for Electronic Industry,2009,38(4):37-39. doi: 10.3969/j.issn.1004-4507.2009.04.007
    [9]
    刘海旭, 武庆东, 曹潇俊, 等. 基于响应曲面法的304不锈钢化学机械抛光工艺参数优化 [J]. 金刚石与磨料磨具工程,2021,41(2):89-95.

    LIU Haixu, WU Qingdong, CAO Xiaojun, et al. Optimization of process parameters for chemical mechanical polishing of 304 stainless steel based on response surface method [J]. Diamond & Abrasives Engineering,2021,41(2):89-95.
    [10]
    李庆, 陈绍坤, 彭亚男, 等. 304不锈钢化学机械抛光工艺参数研究 [J]. 金刚石与磨料磨具工程,2016,36(5):21-25.

    LI Qing, CHEN Shaokun, PENG Yanan, et al. Study on process parameters of chemical mechanical polishing of 304 stainless steel [J]. Diamond & Abrasives Engineering,2016,36(5):21-25.
    [11]
    莫益栋, 李庆忠. TFT-LCD玻璃基板精细雾化抛光的工艺参数优化 [J]. 中国表面工程,2015,28(2):121-125. doi: 10.11933/j.issn.1007-9289.2015.02.014

    MO Yidong, LI Qingzhong. Optimizing process parameters of ultrasound fine atomization CMP on TEF-LCD glass substrate [J]. China Mechanical Engineering,2015,28(2):121-125. doi: 10.11933/j.issn.1007-9289.2015.02.014
    [12]
    季军, 何平, 潘国峰, 等. CMP工艺对Co/Cu去除速率及速率选择比的影响研究 [J]. 微电子学,2018,48(5):699-704. doi: 10.13911/j.cnki.1004-3365.170534

    JI Jun, HE Ping, PAN Guofeng, et al. Study on the effect of CMP process on removal rate and removal rate selection ratio of Co/Cu [J]. Microelectronics,2018,48(5):699-704. doi: 10.13911/j.cnki.1004-3365.170534
    [13]
    袁巨龙, 毛美姣, 李敏, 等. 基于响应曲面法的YG8硬质合金刀片化学机械抛光工艺参数优化 [J]. 中国机械工程,2018,29(19):2290-2297. doi: 10.3969/j.issn.1004-132X.2018.19.004

    YUAN Julong, MAO Meijiao, LI Min, et al. Optimization of process parameters for chemical mechanical polishing of YG8 carbide blade based on response surface method [J]. China Mechanical Engineering,2018,29(19):2290-2297. doi: 10.3969/j.issn.1004-132X.2018.19.004
    [14]
    BUFFA G, DONATI L, FRATINI L, et al. Solid state bonding mechanics in extrusion and FSW: Experimental tests and numerical analyses [J]. AIP Conference Proceedings,2007,907(1):590-595.
    [15]
    李莉, 张赛, 何强, 等. 响应面法在试验设计与优化中的应用 [J]. 实验室研究与探索,2015,34(8):41-45. doi: 10.3969/j.issn.1006-7167.2015.08.011

    LI Li, ZHANG Sai, HE Qiang, et al. Application of response surface methodology in experimental design and optimization [J]. Laboratory Research and Exploration,2015,34(8):41-45. doi: 10.3969/j.issn.1006-7167.2015.08.011
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(6)  / Tables(6)

    Article Metrics

    Article views (419) PDF downloads(50) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return