Effect of B2O3 content on the structure and properties of SiO2–B2O3–Al2O3–Na2O system ceramic binder

WANG Zhao; XU Sankui; HUANG Wei; XU Tianbing; HAN Ping; YAN Guojin; CHEN Zhaoqi; WU Tanyang

doi:10.13394/j.cnki.jgszz.2022.0041

Volume 42 Issue 5

Oct. 2022

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Diamond & Abrasives Engineering > 2022 > 42(5): 552-559

WANG Zhao, XU Sankui, HUANG Wei, XU Tianbing, HAN Ping, YAN Guojin, CHEN Zhaoqi, WU Tanyang. Effect of B2O3 content on the structure and properties of SiO2–B2O3–Al2O3–Na2O system ceramic binder[J]. Diamond & Abrasives Engineering, 2022, 42(5): 552-559. doi: 10.13394/j.cnki.jgszz.2022.0041

Citation:

WANG Zhao, XU Sankui, HUANG Wei, XU Tianbing, HAN Ping, YAN Guojin, CHEN Zhaoqi, WU Tanyang. Effect of B₂O₃ content on the structure and properties of SiO₂–B₂O₃–Al₂O₃–Na₂O system ceramic binder[J]. Diamond & Abrasives Engineering, 2022, 42(5): 552-559. doi: 10.13394/j.cnki.jgszz.2022.0041

Citation:

PDF( 3456 KB)

Effect of B₂O₃ content on the structure and properties of SiO₂–B₂O₃–Al₂O₃–Na₂O system ceramic binder

doi: 10.13394/j.cnki.jgszz.2022.0041

1.
School of Materials Science and Engineering, Henan University of Technology, Zhengzhou 450001, China
2.
Lianyungang Woxin Advanced Material Co., Ltd., Lianyungang 222300, Jiangsu, China

More Information

Received Date: 2022-04-12
Rev Recd Date: 2022-07-02

Available Online: 2022-07-13

Abstract

Abstract

The SiO₂–B₂O₃–Al₂O₃–Na₂O system glass samples and the ceramic binder samples with different B₂O₃ contents were prepared. The density and the microhardness of different glass samples, the bending strength, the micro morphology and the thermal expansion coefficient of ceramic binder samples were measured by electronic multifunctional experimental machine, scanning electron microscope, microhardness instrument, plane flow method and thermal expansion coefficient tester. The structures and the compositions of the ceramic binder were analyzed by X-ray diffractometer and Fourier transform infrared spectrometer. The results show that the introduction of B₂O₃ into the ceramic binder can effectively reduce its sintering temperature, improve its thermal stability and adjust its thermal expansion coefficient. When B₂O₃ with mole fraction of 15% is added to the ceramic binder, the maximum bending strength of the spline is 78.11 MPa, and the maximum density and hardness are 2.45 g/cm³ and 856 MPa respectively, and the thermal expansion coefficient of the ceramic binder is the best match with that of diamond. The results of X-ray diffraction analysis show that the ceramic binder is a typical glass phase structure and has a good coating effect on the abrasives.
- B₂O₃ doping,
- ceramic binder,
- diamond abrasives,
- bending strength,
- microstructure,
- thermal expansion coefficient

FullText(HTML)

References(19)

References

[1]	曾俊, 瓦崇龙. 陶瓷结合剂金刚石砂轮在加工PCD刀具中的优越性 [J]. 超硬材料工程,2005(4):18-20. doi: 10.3969/j.issn.1673-1433.2005.04.005 ZENG Jun, WA Chonglong. Advantages of ceramic binder diamond grinding wheel in machining PCD tools [J]. Superhard Material Engineering,2005(4):18-20. doi: 10.3969/j.issn.1673-1433.2005.04.005
[2]	COOK M W, BOSSOM P K. Trends and recent developments in the material manufacture and cutting tool application of polycrystalline diamond and polycrystalline cubic boron nitride [J]. International Journal of Refractory Metals and Hard Materials,2000,18(2/3):147-152. doi: 10.1016/S0263-4368(00)00015-9
[3]	栾时勋. 金刚石砂轮用ZnO–B₂O_3–SiO₂微晶玻璃结合剂的制备与应用研究 [D]. 南京: 南京航空航天大学, 2018. LUAN Shixun. Preparation and application of ZnO–B₂O_3–SiO₂ glass ceramic binder for diamond grinding wheel [D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2018.
[4]	ZHANG X H, WANG Y H, ZANG J B, et al. Improving oxidation resistance of diamond by adding silicon into diamond−borosilicate glass composites [J]. International Journal of Refractory Metals and Hard Materials,2011,29(4):495-498. doi: 10.1016/j.ijrmhm.2011.02.009
[5]	JACKSON M J, BARLOW N, MILLS B. The effect of bond composition on the strength of partially-bonded vitrified ceramic abrasives [J]. Journal of Materials Science Letters,1994,13(1):1287-1289.
[6]	于天彪, 王学智, 孙雪, 等. 高性能CBN砂轮陶瓷结合剂研究进展 [J]. 金刚石与磨料磨具工程,2015,35(2):1-8. doi: 10.13394/j.cnki.jgszz.2015.2.0001 YU Tianbiao, WANG Xuezhi, SUN Xue, et al. Research progress of high performance CBN grinding wheel ceramic binder [J]. Diamond & Abrasives Engineering,2015,35(2):1-8. doi: 10.13394/j.cnki.jgszz.2015.2.0001
[7]	KARABULUT M, YUCE B, BOZDOGAN O, et al. Effect of boron addition on the structure and properties of iron phosphate glasses [J]. Journal of Non-Crystalline Solids,2011,357(5):1455-1462. doi: 10.1016/j.jnoncrysol.2010.11.023
[8]	姜蓉蓉. 金刚石磨具用低温陶瓷结合剂的研究 [D]. 天津: 天津大学, 2014. JIANG Rongrong. Study on low temperature ceramic binder for diamond abrasive tools [D]. Tianjin: Tianjin University, 2014.
[9]	JACKSON M J, MILLS B. Materials selection applied to vitrified alumina & CBN grinding wheels [J]. Journal of Materials Processing Technology,2000(108):114-124.
[10]	张小福, 卢安贤, 张红霞. 高温下微晶玻璃结合剂对金刚石磨料浸润性研究 [J]. 金刚石与磨料磨具工程,2007(1):44-46, 59. doi: 10.3969/j.issn.1006-852X.2007.01.011 ZHANG Xiaofu, LU Anxian, ZHANG Hongxia. Study on the wettability of glass ceramic binder to diamond abrasive at high temperature [J]. Diamond & Abrasives Engineering,2007(1):44-46, 59. doi: 10.3969/j.issn.1006-852X.2007.01.011
[11]	何峰, 房玉, 刘佳, 等. B₂O₃对硼硅酸盐玻璃结构和性能的影响 [J]. 武汉理工大学学报,2012,34(2):1-4. doi: 10.3963/j.issn.1671-4431.2012.02.001 HE Feng, FANG Yu, LIU Jia, et al. Effect of B₂O₃ on the structure and properties of borosilicate glass [J]. Journal of Wuhan University of Technology,2012,34(2):1-4. doi: 10.3963/j.issn.1671-4431.2012.02.001
[12]	张盼, 张芩宇, 姜宏, 等. B₂O₃对低膨胀硼硅酸盐玻璃结构及性能影响的研究 [J]. 硅酸盐通报, 2021, 40(5): 1685-1691, 1697. ZHANG Pan, ZHANG Cenyu, JIANG Hong, et al. Study on the effect of B₂O₃ on the structure and properties of low expansion borosilicate glass [J]. Silicate Bulletin, 2021, 40(5): 1685-1691, 1697.
[13]	胡永强, 郑昆鹏, 刘新建, 等. 用于SIC晶片的减薄多孔陶瓷复合结合剂、金刚石刀头、砂轮及其制造方法: 202011231728.7 [P]. 2021-11-09. HU Yongqiang, ZHENG Kunpeng, LIU Xinjian, et al. Thinning porous ceramic composite binder for SiC wafer, diamond cutter head, grinding wheel and manufacturing method: 202011231728.7 [P]. 2021-11-09.
[14]	刘宏伟, 吕升东, 刘星星, 等. 一种控制陶瓷结合剂熔制过程中硼挥发的方法: 201810967519.5 [P]. 2018-12-28. LIU Hongwei, LYU Shengdong, LIU Xingxing, et al. A method for controlling boron volatilization in the melting process of ceramic binder: 201810967519.5 [P]. 2018-12-28.
[15]	万军鹏. 浮法硼硅酸盐平板玻璃组成、结构与性能的研究 [D]. 武汉: 武汉理工大学, 2008. WAN Junpeng. Study on composition, structure and properties of float borosilicate flat glass [D]. Wuhan: Wuhan University of Technology, 2008.
[16]	赵仕敬, 王海龙, 李剑, 等. Na₂O含量对金刚石砂轮用Na₂O–SiO₂–Al₂O₃–B₂O₃系陶瓷结合剂性能的影响 [J]. 机械工程材料,2018,42(4):1-6,39. doi: 10.11973/jxgccl201804001 ZHAO Shijing, WANG Hailong, LI Jian, et al. Effect of Na₂O content on the properties of Na₂O–SiO₂–Al₂O₃–B₂O₃ ceramic binder for diamond grinding wheel [J]. Mechanical Engineering Materials,2018,42(4):1-6,39. doi: 10.11973/jxgccl201804001
[17]	侯永改. 陶瓷磨具制造 [M]. 北京: 中国轻工业出版社, 2009. HOU Yonggai. Manufacturing of ceramic abrasive tools [M]. Beijing: China Light Industry Press, 2009.
[18]	JACKSON M J, MILLS B. Thermal expansion of alumino-alkalisilicate and aluminoborosilicate glasses—Comparison of empirical models [J]. Journal of Materials Science Letters,1997(16):1264-1266.
[19]	刘世权, 许淑惠, 袁怡松, 等. 玻璃粉末的烧结 [J]. 玻璃与搪瓷,1995(5):34-38, 23. LIU Shiquan, XU Shuhui, YUAN Yisong, et al. Sintering of glass powder [J]. Glass & Enamel,1995(5):34-38, 23.

Relative Articles

[1]	WANG Xi, KANG Aolong, JIAO Zengkai, KANG Huiyuan, WU Chengyuan, ZHOU Kechao, MA Li, DENG Zejun, WANG Yijia, YU Zhiming, WEI Qiuping. Effect of diamond particle size on thermophysical properties of diamond /Cu-B alloy composites[J]. Diamond & Abrasives Engineering, 2024, 44(2): 169-178. doi: 10.13394/j.cnki.jgszz.2023.0062
[2]	CHEN Qi, WANG Chunhua, LI Zhengxin, ZHANG Lin, ZHANG Guowei, ZHOU Shaojie, XIA Xuefeng, SHAO Junyong. Effect of composition and content on properties of vitrified bond[J]. Diamond & Abrasives Engineering, 2024, 44(6): 761-768. doi: 10.13394/j.cnki.jgszz.2023.0126
[3]	XU Yuchun, ZHU Jianhui, SHI Chaoyu, WANG Ningchang, ZHAO Yanjun, ZHANG Gaoliang, QIAO Shuai, GU Chunqing. Roughness prediction of Al₂O₃-based ceramic insulation coating on bearing surface[J]. Diamond & Abrasives Engineering, 2024, 44(3): 346-353. doi: 10.13394/j.cnki.jgszz.2023-0118
[4]	CHENG Xiaozhe, XU Yan, MU Yunchao, HAN Jinghe, LIU Tao. Exploration of ceramic binder diamond aggregated abrasives[J]. Diamond & Abrasives Engineering, 2024, 44(1): 31-38. doi: 10.13394/j.cnki.jgszz.2023.0022
[5]	BAI Fuhou, LIAO Yanling, XUAN Chuang, ZHANG Fenglin. Preparation of vitrified bond diamond wheel based on Bi₂O₃-B₂O₃ glass system and its grinding performance on monocrystalline silicon[J]. Diamond & Abrasives Engineering, 2023, 43(4): 432-439. doi: 10.13394/j.cnki.jgszz.2022.0137
[6]	WEN Lu, ZHOU Qiang, LUO Li, PAN Xixiang, WU Jinpin. Effect of Y₂O₃ on properties of iron-based diamond tools[J]. Diamond & Abrasives Engineering, 2022, 42(5): 560-566. doi: 10.13394/j.cnki.jgszz.2022.0046
[7]	KANG Aolong, KANG Huiyuan, JIAO Zengkai, WANG Xi, ZHOU Kechao, MA Li, DENG Zejun, WANG Yijia, YU Zhiming, WEI Qiuping. Preparation of high thermal conductivity diamond/Cu–B alloy composites by gas pressure infiltration method[J]. Diamond & Abrasives Engineering, 2022, 42(6): 667-675. doi: 10.13394/j.cnki.jgszz.2022.0017
[8]	XUAN Chuang, WANG Chaochao, BAI Fuhou, ZHANG Fenglin. Vitrified bond diamond grinding wheel based on hollow corundum microspheres[J]. Diamond & Abrasives Engineering, 2022, 42(4): 442-448. doi: 10.13394/j.cnki.jgszz.2021.4001
[9]	LU Jiabin, NIE Xiaowei, YAN Qiusheng, CHEN Haiyang. Research on preparation of vitrified bond lapping plates and lapping sapphire performance[J]. Diamond & Abrasives Engineering, 2021, 41(3): 48-54. doi: 10.13394/j.cnki.jgszz.2021.3.0007
[10]	HAN Ping, LIU Hengyuan, XU Sankui, HUANG Wei, XU Tianbing. Effect of TiH₂ on structure and properties of Cu60Zn40 alloy metal bond[J]. Diamond & Abrasives Engineering, 2021, 41(6): 51-55. doi: 10.13394/j.cnki.jgszz.2021.6.0009
[11]	ZHAO Pengcheng, YAN Xinlin, XIAO Bing, MENG Xianglong, LIU Bingheng. Effect of volume ratio between Cu-Sn-Ti alloy and vitrified binder on microstructures and mechanical properties of diamond segments[J]. Diamond & Abrasives Engineering, 2020, 40(3): 52-56. doi: 10.13394/j.cnki.jgszz.2020.3.0008
[12]	DING Yulong, MIAO Weipeng, LUO Miaodi, FENG Bingqiang, ZHU Jianhui, ZHAO Yanjun, BAO Hua. Influence of structure of vitrified bond diamond grinding wheel on its performance[J]. Diamond & Abrasives Engineering, 2020, 40(4): 19-23. doi: 10.13394/j.cnki.jgszz.2020.4.0003
[13]	TIAN Jiugen, HOU Yonggai. Effect of ZrSiO₄on properties and structures of low temperature vitrified bond[J]. Diamond & Abrasives Engineering, 2019, 39(6): 48-52. doi: 10.13394/j.cnki.jgszz.2019.6.0009
[14]	XU Qingbo, WANG Chuanxin, WANG Tao, DAI Kai, XIA Shuping. Preparation and properties of boron doped diamond films[J]. Diamond & Abrasives Engineering, 2018, 38(3): 11-15,20. doi: 10.13394/j.cnki.jgszz.2018.3.0003
[15]	TAN Qiuhong, ZHAO Yucheng, WANG Mingzhi, ZOU Qin. Improving strength and toughness of vitrified bond by adding nano-rare earth oxides[J]. Diamond & Abrasives Engineering, 2018, 38(6): 19-24. doi: 10.13394/j.cnki.jgszz.2018.6.0004
[16]	LIU Wei, LIU Yibo, HUANG Xia, YIN Xiang. Application of vitrified bonded diamond wheel in YG10X cemented carbide anvil grinding[J]. Diamond & Abrasives Engineering, 2018, 38(5): 73-77. doi: 10.13394/j.cnki.jgszz.2018.5.0014
[17]	LUAN Shixun, FU Renli, ZHU Haiyang, LIU Qilong, LI Yujun. Crystallization of ZABS glass and its wettability on diamond abrasive[J]. Diamond & Abrasives Engineering, 2018, 38(2): 26-31,36. doi: 10.13394/j.cnki.jgszz.2018.2.0006
[18]	LI Guangfeng, HOU Yonggai, GAO Yuan, LI Wenfeng, HUANG Qingfei, DING Zhijing. Effect of heat preservation on the property and structure of low-temperature vitrified/Cu-Sn-Fe-based bond diamond tool[J]. Diamond & Abrasives Engineering, 2017, 37(2): 46-49. doi: 10.13394/j.cnki.jgszz.2017.2.0010
[19]	SHI Linfeng, HAN Xue, GAO Yongjuan, LIU Quanwei. Effect of Al₂O₃ hollow sphere on properties of resin bond diamond disc in sapphire grinding[J]. Diamond & Abrasives Engineering, 2017, 37(3): 15-18. doi: 10.13394/j.cnki.jgszz.2017.3.004
[20]	CHEN Feixiao, ZHAO Zhiwei, HU Wenmeng. Effect of nanometer Ti(C,N)on property of vitrified bond for CBN abrasives[J]. Diamond & Abrasives Engineering, 2016, 36(2): 49-54. doi: 10.13394/j.cnki.jgszz.2016.2.0011

Supplements(0)

Cited By

Cited by

Periodical cited type(4)

1.	席耀辉，王志起，穆龙阁，于晓凯，李鹤南，孙鹏辉，李学文，李世华，刘宾，胡晨辉，陈怀亮. H_3BO_3对钙长石/玻璃复合陶瓷结合剂结构与性能的影响. 超硬材料工程. 2025(02): 22-25+45 .
2.	陈棋，王春华，栗正新，张霖，张国威，周少杰，夏学峰，邵俊永. 陶瓷结合剂中各组分含量对其性能的影响. 金刚石与磨料磨具工程. 2024(06): 761-768 . 本站查看
3.	吴恒恒，许桥，周宏根，管小燕，史肖娜，李国超. 陶瓷CBN砂轮的研究进展. 金刚石与磨料磨具工程. 2023(04): 455-473 . 本站查看
4.	陈兆奇，韩平，赵梦洁，王照，白国巨. 球磨工艺对废玻璃管粒度及用于陶瓷结合剂的影响. 超硬材料工程. 2023(04): 20-25 .

Other cited types(8)

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Figures(7) / Tables(3)

Get Citation

PDF

XML

Article Metrics

Article views (782) PDF downloads(69)