Effect of Cu-Ce alloy on property of Fe-based metal bond

CHEN Jinshen; ZHI Hongmei; FAN Xueqin; ZHAO Zhiwei

doi:10.13394/j.cnki.jgszz.2016.4.0006

Volume 36 Issue 4

Aug. 2016

Turn off MathJax

Article Contents

Article Navigation > Diamond & Abrasives Engineering > 2016 > 36(4): 29-33

CHEN Jinshen, ZHI Hongmei, FAN Xueqin, ZHAO Zhiwei. Effect of Cu-Ce alloy on property of Fe-based metal bond[J]. Diamond & Abrasives Engineering, 2016, 36(4): 29-33. doi: 10.13394/j.cnki.jgszz.2016.4.0006

Citation:

CHEN Jinshen, ZHI Hongmei, FAN Xueqin, ZHAO Zhiwei. Effect of Cu-Ce alloy on property of Fe-based metal bond[J]. Diamond & Abrasives Engineering, 2016, 36(4): 29-33. doi: 10.13394/j.cnki.jgszz.2016.4.0006

Citation:

PDF( 844 KB)

Effect of Cu-Ce alloy on property of Fe-based metal bond

doi: 10.13394/j.cnki.jgszz.2016.4.0006

1. College of Material Science and Engineering, Henan University of Technology, Zhengzhou 450001, China;
2. Department of Applied Chemistry, Henan Vocational College of Chemical Technology, Zhengzhou 450042, China

More Information

Rev Recd Date: 2016-06-05

Available Online: 2022-07-27

Abstract

Abstract

To further enhance the property of Fe-based metal bond,Cu-Ce alloy,Fe,Sn and Cu are used to prepare different types of metal bond by hot pressing,thus studying the effect of Cu-Ce alloy on property of the bond.The results show that density and impact strength of the bond increase as the content of Cu-Ce alloy increases,while the bending strength and Rockwell hardness increase and then decrease.It is concluded that HRB reaches its top value when the mass fraction of Cu-Ce alloy is 8%,and that the bending strength increases to its maximum,namely 518.12 MPa when Cu-Ce mass fraction is 6%.It is also found that adding Cu-Sn alloy reduces mechanical property of Fe-based metal bond.
- Cu-Ce alloy,
- Fe-based bond,
- impact strength,
- flexural strength