[1] |
LI C, LI X, WU Y, et al. Deformation mechanism and force modelling of the grinding of YAG single crystals [J]. International Journal of Machine Tools and Manufacture,2019,143:23-37. doi: 10.1016/j.ijmachtools.2019.05.003
|
[2] |
SHI H, LIU G, YANG G, et al. Analytical modelling of edge chipping in scratch of soda-lime glass considering strain-rate hardening effect [J]. Ceramics International,2021,47(18):26552-26566. doi: 10.1016/j.ceramint.2021.06.069
|
[3] |
HU W, TENG Q, HONG T, et al. Stress field modeling of single-abrasive scratching of BK7 glass for surface integrity evaluation [J]. Ceramics International,2022,48(9):12819-12828. doi: 10.1016/j.ceramint.2022.01.153
|
[4] |
QI H, SHI L, TENG Q, et al. Subsurface damage evaluation in the single abrasive scratching of BK7 glass by considering coupling effect of strain rate and temperature [J]. Ceramics International,2022,48(6):8661-8670. doi: 10.1016/j.ceramint.2021.12.077
|
[5] |
QIU Z, LIU C, WANG H, et al. Crack propagation and the material removal mechanism of glass-ceramics by the scratch test [J]. Journal of the Mechanical Behavior of Biomedical Materials,2016,64:75-85. doi: 10.1016/j.jmbbm.2016.07.021
|
[6] |
FENG J, WAN Z, WANG W, et al. Crack behaviors of optical glass BK7 during scratch tests under different tool apex angles [J]. Wear,2019,430-431:299-308. doi: 10.1016/j.wear.2019.05.023
|
[7] |
王伟. 石英玻璃的高效可控精密磨削机理研究 [D]. 济南: 山东大学, 2017.WANG Wei. Research on the mechanism of efficient and controllable precision grinding of quartz glass [D]. Jinan: Shandong University, 2017.
|
[8] |
YANG X, QIU Z, LI X. Investigation of scratching sequence influence on material removal mechanism of glass-ceramics by the multiple scratch tests [J]. Ceramics International,2019,45(1):861-73. doi: 10.1016/j.ceramint.2018.09.256
|
[9] |
LI C, PIAO Y, MENG B, et al. Phase transition and plastic deformation mechanisms induced by self-rotating grinding of GaN single crystals [J]. International Journal of Machine Tools and Manufacture,2022,172:103827. doi: 10.1016/j.ijmachtools.2021.103827
|
[10] |
ZHANG B, YIN J. The ‘skin effect’of subsurface damage distribution in materials subjected to high-speed machining [J]. International Journal of Extreme Manufacturing,2019,1(1):012007. doi: 10.1088/2631-7990/ab103b
|
[11] |
YANG X, ZHANG B. Material embrittlement in high strain-rate loading [J]. International Journal of Extreme Manufacturing,2019,1(2):022003. doi: 10.1088/2631-7990/ab263f
|
[12] |
TIAN L, FU Y, XU J, et al. The influence of speed on material removal mechanism in high speed grinding with single grit [J]. International Journal of Machine Tools and Manufacture,2015,89:192-201. doi: 10.1016/j.ijmachtools.2014.11.010
|
[13] |
BANDYOPADHYAY P, DEY A, MANDAL A K, et al. Effect of scratching speed on deformation of soda–lime–silica glass [J]. Applied Physics A,2012,107(3):685-690. doi: 10.1007/s00339-012-6844-3
|
[14] |
QI H, FANG J, WANG J, et al. Impact erosion by high velocity micro-particles on a quartz crystal [J]. Tribology International,2015,82:200-210. doi: 10.1016/j.triboint.2014.10.016
|