Application of fine powder in metal bonded grinding wheels
-
摘要: 为研究微细粉末对金属结合剂砂轮性能的影响,将微细粉末和普通粉末按照设计的比例均匀混合,采用热压烧结的方法制成胎体试块,且在混合粉末中添加超硬磨料制成金属结合剂超硬材料砂轮,利用硬度计、抗折试验机、扫描电镜、切割试验机等设备,分别测试金属结合剂胎体硬度、抗折强度、断口形貌以及金属结合剂超硬材料砂轮切割性能。结果表明:微细粉末的添加有利于提高金属结合剂胎体的抗折强度,最高可以提升20%;另一方面,还可增加超硬材料砂轮的耐磨性,相同试验条件下测得半径磨损量降低了25.7%。Abstract: In order to explore the effect of fine powder on the performance of metal bonded grinding wheel, the fine powder and ordinary powder with different ratios were mixed homogeneously and were made into matrix body-blocks by hot pressure sintering method.Moreover, superabrasive were added to the above mixed powder and were made into metal bonded superabrasives.By employing the sclerometer, the bending test machine, the scanning electron microscopy, the cutting machine and so on, we tested the hardness of metal bond matrix, the bending strength, the fracture morphology and the cutting performance respectively.The results show that fine powder is favorable to raise the bending strength of metal bond matix and the maximum increase is 20%, and that it also increases the wear resistance of superabrasives, with radius abrasion reduced by 25.7% at the same conditions.
-
Key words:
- fine powder /
- metal bond /
- quantity of radius abrasion
点击查看大图
计量
- 文章访问数: 214
- HTML全文浏览量: 52
- PDF下载量: 17
- 被引次数: 0