CN 41-1243/TG ISSN 1006-852X
Turn off MathJax
Article Contents
Study on Mechanical Properties and Rock Breaking Effect of Ridge-Shaped Cutters[J]. Diamond & Abrasives Engineering. doi: 10.13394/j.cnki.jgszz.2023.0172
Citation: Study on Mechanical Properties and Rock Breaking Effect of Ridge-Shaped Cutters[J]. Diamond & Abrasives Engineering. doi: 10.13394/j.cnki.jgszz.2023.0172

Study on Mechanical Properties and Rock Breaking Effect of Ridge-Shaped Cutters

doi: 10.13394/j.cnki.jgszz.2023.0172
More Information
  • Received Date: 2023-08-26
  • Accepted Date: 2023-11-06
  • Rev Recd Date: 2023-10-23
  • Available Online: 2023-11-06
  • Based on the formation characteristics, the targeted selection of shaped cutters can reduce the probability of PDC cutters failure and increase the rate of penetration (ROP) and footage. In order to comprehensively compare the mechanical properties and rock-breaking effect of ridge-shaped PDC cutters, three kinds of ridge-shaped PDC cutters (165-axe, 135-axe, and triple-edged) were firstly studied for wear resistance and impact resistance, and then granite was selected to conduct single-cutter cutting experiments at three depths of cut (DOC), and simulated drilling experiments of full-size bits under different weight of bit, and compared with round cutter. The results show that: ① The wear resistance of ridge-shaped PDC cutter is better than that of round cutter. ② The impact resistance of 165-axe and three-edged cutter is better than that of round cutter, and 135-axe has poorer impact resistance due to the lack of support at the point of impact. ③ At the same DOC, the tangential force and normal force of ridge cutter are lower than that of round cutter, and the smaller the angle of the ridge is, the smaller the cutting force is. ④ The 135 axe shape has the fastest ROP and is suitable for high WOB, the triple-edged cutter have a faster ROP in the low drilling pressure range (less than 20 kN) and a slower ROP in the high drilling pressure range (more than 20 kN) compared to the 165-axe. The rounded cutter have the slowest ROP and are suitable for lower WOB. The experimental results show that when the ridge angle changes, the support material at the impact point also changes, which affects its impact resistance, and at the same time, the change of the ridge angle will change the stress concentration inside the rock in front of it, which will change the effect of rock breaking. The results of this paper can provide a reference for the optimal design of ridge cutter design, bit cutter placement and drilling parameter selection.

     

  • loading
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (187) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return