CN 41-1243/TG ISSN 1006-852X
Volume 42 Issue 4
Aug.  2022
Turn off MathJax
Article Contents
CUI Yuxiao, MA Jiahao, YAN Bing, QI Houjun, CAI Yujun. Investigation on tribological performance of LIPSS-structured nano-crystalline diamond films[J]. Diamond &Abrasives Engineering, 2022, 42(4): 433-441. doi: 10.13394/j.cnki.jgszz.2022.0063
Citation: CUI Yuxiao, MA Jiahao, YAN Bing, QI Houjun, CAI Yujun. Investigation on tribological performance of LIPSS-structured nano-crystalline diamond films[J]. Diamond &Abrasives Engineering, 2022, 42(4): 433-441. doi: 10.13394/j.cnki.jgszz.2022.0063

Investigation on tribological performance of LIPSS-structured nano-crystalline diamond films

doi: 10.13394/j.cnki.jgszz.2022.0063
  • Received Date: 2022-05-04
  • Accepted Date: 2022-06-17
  • Rev Recd Date: 2022-06-12
  • The aim of present work was to investigate the tribological behavior of CVD nano-crystalline diamond (NCD) films with laser-induced periodic surface structures (LIPSS). The LIPSS textures were fabricated in ambient air using a Yb-doped photonic crystal fiber amplifier femtosecond (fs) laser with pulse duration of 200 fs and central wavelength of 1040 nm. Two types of LIPSS texture, namely continuously distributed LIPSS (CDL) texture and a complex texture formed of evenly spaced LIPSS stripes (ESLS), were obtained with the above processing conditions. The tribological behavior of as-fabricated LIPSS textures was evaluated via ball-on-disc tests in dry reciprocating sliding motion, and ZrO2 ceramic balls were used as counterparts. In addition, there were two types of reciprocating direction involved in the frictional tests, namely the direction parallel/vertical to the orientation of LIPSS ripples. The results indicate that as the LIPSS can work as reservoir for wear debris and reduce the contact area during the friction process, the LIPSS textured NCD surface showed obviously reduced friction coefficient in comparison with the conventional NCD surface, which was reduced from 0.42 to 0.09. Besides, for the CDL surface, the friction coefficient as the LIPSS ripples vertical to the reciprocating direction was higher than that as the LIPSS ripples parallel to the reciprocating direction. In the case of ESLS surface, however, the direction of the LIPSS ripples had little influence on the friction coefficient.


  • loading
  • [1]
    LIN T, YU G, WEE A, et al. Compositional mapping of the argon–methane–hydrogen system for polycrystalline to nanocrystalline diamond film growth in a hot-filament chemical vapor deposition system [J]. Applied Physics Letters,2000,77:2962-2964.
    王学根, 孙方宏, 张志明, 等. 纳米金刚石薄膜研究进展 [J]. 金刚石与磨料磨具工程,2003(5):1-7. doi: 10.3969/j.issn.1006-852X.2003.05.001

    WANG Xuegen, SUN Fanghong, ZHANG Zhiming, et al. Progress of the researches on nanocrystalline diamond film [J]. Diamond & Abrasives Engineering,2003(5):1-7. doi: 10.3969/j.issn.1006-852X.2003.05.001
    刘素田, 唐伟忠, 耿春雷, 等. 纳米金刚石薄膜的制备和应用 [J]. 金刚石与磨料磨具工程,2006(1):75-79. doi: 10.3969/j.issn.1006-852X.2006.01.021

    LIU Sutian, TANG Weizhong, GENG Chunlei, et al. Preparation and application of nanocrystalline diamond films [J]. Diamond & Abrasives Engineering,2006(1):75-79. doi: 10.3969/j.issn.1006-852X.2006.01.021
    AMARAL M, CARREIRA D, FERNANDES A, et al. A DLC/diamond bilayer approach for reducing the initial friction towards a high bearing capacity [J]. Wear,2012,290/291:18-24. doi: 10.1016/j.wear.2012.05.026
    OBIKAWA T, KAMIO A, TAKAOKA H, et al. Micro-texture at the coated tool face for high performance cutting [J]. International Journal of Machine Tools & Manufacture,2011,51:966-972.
    NAKANO M, MIYAKE K, KORENAGA A, et al. Tribological properties of patterned NiFe-covered Si surfaces [J]. Tribology Letters,2009,35:133-139. doi: 10.1007/s11249-009-9442-6
    SUI T, CUI Y, LIN B, et al. Influence of nanosecond laser processed surface textures on the tribological characteristics of diamond films sliding against zirconia bioceramic [J]. Ceramic International,2018,44:23137-23144. doi: 10.1016/j.ceramint.2018.09.122
    SATORI S, ORLANDO S, BELLUCCI A, et al. Laser-induced periodic surface structures (LIPSS) on heavily boron-doped diamond for electrode applications [J]. ACS Applied Materials & Interfaces,2018,10:43236-43251.
    VOROBYEV A, GUO C. Colorizing metals with femtosecond laser pulses [J]. Applied Physics Letters,2008,92:041914. doi: 10.1063/1.2834902
    CUNHA A, SERRO A, OLIVEIRA V, et al. Wetting behaviour of femtosecond laser textured Ti–6Al–4V surfaces [J]. Applied Surface Science,2013,265:688-696. doi: 10.1016/j.apsusc.2012.11.085
    VOYER J, KLIEN S, AUSSERER F, et al. Friction reduction through sub-micron laser surface modifications [J]. Tribologie und Schmierungstechnik,2015,62:13-18.
    BONSE J, KOTER R, HARTELT M, et al. Femtosecond laser-induced periodic surface structures on steel and titanium alloy for tribological applications [J]. Applied Physics A,2014,117:103-110. doi: 10.1007/s00339-014-8229-2
    BONSE J, HOHM S, KOTER R, et al. Tribological performance of sub-100-nm femtosecond laser-induced periodic surface structures on titanium [J]. Applied Surface Science,2016,374:190-196. doi: 10.1016/j.apsusc.2015.11.019
    OGAWA Y, OTA M, NAKAMOTO K, et al. A study on machining of binder-less polycrystalline diamond by femtosecond pulsed laser for fabrication of micro milling tools [J]. CIRP Annals-Manufacturing Technology,2016,65:245-248. doi: 10.1016/j.cirp.2016.04.081
    HUYNH T, SEMMAR N. Dependence of ablation threshold and LIPSS formation on copper thin films by accumulative UV picosecond laser shots [J]. Applied Physics A,2014,116:1429-1435. doi: 10.1007/s00339-014-8255-0
    ZHANG K, DENG J, XING Y, et al. Effect of microscale texture on cutting performance of WC/Co-based TiAlN coated tools under different lubrication conditions [J]. Applied Surface Science,2015,326:107-118. doi: 10.1016/j.apsusc.2014.11.059
    BOROWIEC A, HAUGEN H. Subwavelength ripple formation on the surfaces of compound semiconductors irradiated with femtosecond laser pulses [J]. Applied Physics Letters,2003,82:4462-4464. doi: 10.1063/1.1586457
    DERRIEN T, KOTER R, KRUGER J, et al. Plasmonic formation mechanism of periodic 100-nm-structures upon femtosecond laser irradiation of silicon in water [J]. Journal of Applied Physics,2014,116:074902. doi: 10.1063/1.4887808
    COSTACHE F, HENYK M, REIF J. Surface patterning on insulators upon femtosecond laser ablation [J]. Applied Surface Science,2003,208/209:486-491. doi: 10.1016/S0169-4332(02)01443-5
    CHEN S, SHEN B, CHEN Y, et al. Synergistic friction-reducing and anti-wear behaviors of graphene with micro- and nano-crystalline diamond films [J]. Diamond & Related Materials,2017,73:25-32.
    FERRARI A, ROBERTSON J. Origin of the 1150 cm-1 Raman mode in nanocrystalline diamond [J]. Physical Review B,2001,63:121405. doi: 10.1103/PhysRevB.63.121405
    CUI Y, SHEN B, SUN F. Influence of amorphous ceramic interlayers on tribological properties of CVD diamond films [J]. Applied Surface Science,2014,313:918-925. doi: 10.1016/j.apsusc.2014.06.107
    胡衡. 磷离子注入纳米金刚石薄膜的微结构与电学性能研究 [D]. 杭州: 浙江工业大学, 2012.

    HU Heng. The microstructural and electrical properties of phosphorus ion implanted nanocrystalline diamond films [D]. Hangzhou: Zhejiang University of Technology, 2012.
    黄桥, 孙红娟, 杨勇辉. 氧化石墨的谱学表征及分析 [J]. 无机化学学报,2011,27:1271-1276.

    HUANG Qiao, SUN Hongjuan, YANG Yonghui. Spectroscopy characterization and analysis of graphite oxide [J]. Chinese Journal of Inorganic Chemistry,2011,27:1271-1276.
  • 加载中


    通讯作者: 陈斌,
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(7)  / Tables(4)

    Article Metrics

    Article views (185) PDF downloads(19) Cited by()
    Proportional views


    DownLoad:  Full-Size Img  PowerPoint